Photoluminescence of ZnO nanowires grown on sapphire (1 1 2¯ 0) substrates

ZnO nanowires were fabricated on c-plane (0 0 0 1), a-plane (1 1 2¯ 0) sapphire, and boron doped p-type (1 0 0) Si substrates in vacuum furnace by simple physical vapor deposition. Room temperature photoluminescence spectra of the nanowires show the near band-edge emission and the deep-level green light emission. The ZnO nanowires formed on sapphire (1 1 2¯ 0) substrates exhibited enhancement on optical properties and better crystalline structures than those of nanowires grown on other substrates. The formation mechanism and the effect of substrate direction on structural and optical properties of the nanowires are discussed.     

Simulation of two‐phase flow–body interaction problems using direct forcing/fictitious domain–level set method

In the present paper, a direct forcing/fictitious domain (DF/FD)–level set method is proposed to simulate the twophase flow–body interaction. The DF/FD does not sacrifice accuracy and robustness by employing a discrete δ (Dirac delta) function to transfer quantities between the Eulerian nodes and Lagrangian points explicitly as the immersed boundary method. The advantages of this approach are the simple concept, the easy implementation and the utilization of original governing equation without modification. The main idea is to combine DF/FD method with the level set method in the Cartesian coordinates. We present the results of a number of test cases to illustrate the effectiveness of the proposed method for single‐phase flow–body interaction problem and the two‐phase flows with a stationary body. Eventually, the simulations of various water entry problems have been conducted to validate the capability and the accuracy of the present method on solving the twophase flow–body interaction. Consequently, the present results are found to be in good agreement with those of previous studies. Copyright © 2013 John Wiley & Sons, Ltd.     

The application of Py-GC/MS for the catalytic upgrading of oil separated from summer food waste leachate

The catalytic cracking of oil fractions separated from summer food waste leachate was investigated over BEA zeolite and Al-SBA-15 catalysts. In this study, a mixture of food waste oil fractions and catalyst was directly introduced to pyrolysis gas chromatography/mass spectrometry (Py-GC/MS), with the resulting vapor phase products being simultaneously analyzed. Various acid compounds, including oleic acid, produced by the non-catalytic pyrolysis of food waste leachate were reformed into valuable compounds, such as oxygenates, hydrocarbons, and aromatics. The BEA zeolite catalyst showed higher selectivity for hydrocarbon compounds, especially aromatics, within the gasoline range due to its superior cracking ability originating from its highly acidic sites. Conversely, the cracking performance of the Al-SBA-15 catalyst, possessing mild acidic sites, was lower than that of the BEA zeolite. Increasing the amount of Al-SBA-15 catalyst enhanced the cracking activity and resulted in higher selectivity for hydrocarbons.     

Phase separation induced by shear quenching in polymer blends with a diblock copolymer

The effects of adding A–B diblock copolymer to a polymer blend (A/B) on phase‐separation kinetics and morphology have been investigated in a fixed shallow‐quench condition (ΔT = 1.5 °C) by in situ time‐resolved light scattering and phase‐contrast optical microscopy. A shear‐quench technique was used in this study instead of a conventional temperature‐quench method. Mixtures of nearly monodisperse low relative‐molecular masses of polybutadiene (M_w = 2.8 kg/mol), polystyrene (M_w = 2.6 kg/mol), and a near‐symmetric butadiene–styrene diblock copolymer (M_w = 6.3 kg/mol) as an interfacial modifier were studied. We observed that the addition of the diblock copolymer could either retard or accelerate the phase‐separation kinetics depending on the concentration of the diblock copolymer in the homopolymer blends. In contrast to the conventional temperature quench, we observed complex phase‐separation kinetics in the intermediate and late stages of phase separation by the shear‐quench technique. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 819–830, 2001     

Effects of passivation treatment on the surface stability in indium-doped Hg0.8Cd0.2Te epilayers grown on p-Cd0.96Zn0.04Te substrates

Passivation treatment on indium-doped Hg_0.8Cd_0.2Te epitaxial layers grown on p-Cd_0.96Zn_0.04Te substrates by molecular beam epitaxy has been performed in order to improve the surface stability of the Hg_0.8Cd_0.2Te layers. Room-temperature capacitance–voltage measurements clearly revealed metal-insulator–semiconductor (MIS) behavior for the Al/ZnS/passivated Hg_0.8Cd_0.2Te layer/Cd_0.96Zn_0.04Te diodes. The fast state density and the fixed charge density of the Al/ZnS/passivated Hg_0.8Cd_0.2Te/Cd_0.96Zn_0.04Te diode with a sulfur-treated Hg_0.8Cd_0.2Te layer were smaller than those with a chemically oxidized Hg_0.8Cd_0.2Te layer. The interface state density at the ZnS/sulfur-treated Hg_0.8Cd_0.2Te interface were low at 10¹¹ eV⁻¹ cm⁻² at the middle of the Hg_0.8Cd_0.2Te energy gap. These results indicate that the Hg_0.8Cd_0.2Te epilayer is significantly passivated by sulfur treatment and that the passivated Hg_0.8Cd_0.2Te layers can be used for Hg_1−xCd_xTe-based MIS diodes and MIS field-effect transistors.     

Interpolymer complex formation between helical poly(L-proline) and random-coil poly(methacrylic acid) through hydrogen bonding

Interpolymer complex formation between poly(L -proline) (PLP) with helical structure and poly(methacrylic acid) (PMAA) with random-coil structure through hydrogen bonding in aqueous medium has been studied by several experimental techniques, e.g., viscometry, turbidimetry, potentiometry, conductometry, scanning electron microscopy, and x-ray diffraction methods. The decreases in reduced viscosity of the solution on addition of an increasing quantity of PLP to a constant amount of PMAA reveals the formation of a complex between PLP and PMAA. The minimum in reduced viscosity at a unit-mole ratio [PLP]/[PMAA] = 1.0 suggests a 1 : 1 complex formation. A distinct change in the curves for turbidity, pH, and conductance versus [PLP]/[PMAA] supports this conclusion. A scanning electron micrograph for the 1 : 1 PLP–PMAA complexes shows that the PLP/PMAA complex has the shape of entangled long fibers. An x-ray diffraction pattern for the PLP/PMAA complexes gives no diffraction patterns which appear in pure PLP, indicating the destruction of the helical structure of PLP due to the interpolymer complexation. Mixtures of PMAA with poly(γ-hydroxy-L -proline) (PHLP) which has a similar conformation as PLP, but involves intra- or intermolecular hydrogen bonds, has also been investigated by vicometry measurements. The reduced viscosity of a solution of the mixed polymers increases with increasing [PHLP], indicating no complex formation. All the results reveal that the magnitude and the nature of the forces acting in the polymers play an important role in interpolymer complexation.     

ZnO nanoparticles with controlled shapes and sizes prepared using a simple polyol synthesis

Nanocrystalline zinc oxide (ZnO) particles with controlled shapes and sizes were prepared at 180 ^°C by a simple polyol method. The amount of water and the method of addition played an important role in determining the characteristics of the synthesized particles. Rod-shaped ZnO particles with major axis lengths of ∼114 nm were obtained by heating the precursor solution, while equiaxial particles with average diameters of ∼24 nm were prepared by injecting water into hot precursor solution. Increasing the amount of water added to the precursor solution enlarged the aspect ratio of the rod-shaped particles and increased the particle size of the equiaxial particles due to enhanced hydrolysis and condensation of the Zn ion complex.     

Biological functionalization of the amine-terminated Si(100) surface by glycine

A peptide reaction of glycine on an amine-terminated Si(100) surface was investigated using C 1s, N 1s, O 1s, and Si 2p core-level spectroscopy, where the amine-terminated Si(100) surface was prepared using NH₃. In-situ thermal treatments at a mild temperature of 50 °C after the adsorption of glycine on a room-temperature amine-terminated Si(100) surface induced the peptide reaction between the carboxyl group of glycine and the amine group of the surface. This suggests that the amine-terminated Si(100) surface can be an excellent template for constructing a junction between a biomaterial and a Si surface using a dry process.     

Reputation and efficiency: A non-parametric assessment of America’s top-rated MBA programs

Widely publicized reports of fresh MBAs getting multiple job offers with six-figure annual salaries leave a long-lasting general impression about the high quality of selected business schools. While such spectacular achievement in job placement rightly deserves recognition, one should not lose sight of the resources expended in order to accomplish this result. In this study, we employ a measure of Pareto-Koopmans global efficiency to evaluate the efficiency levels of the MBA programs in Business Week’s top-rated list. We compute input- and output-oriented radial and non-radial efficiency measures for comparison. Among three tier groups, the schools from a higher tier group on average are more efficient than those from lower tiers, although variations in efficiency levels do occur within the same tier, which exist over different measures of efficiency.     

Electrochemical behavior of dopamine and ascorbic acid at osmium(II) complex cationic monolayer modified gold electrodes.

The electrooxidation of dopamine (DA) and ascorbic acid (AA) was studied using gold electrodes modified by a cationic self-assembled monolayer of [Os(bpy)2(bpy-(CH2),3SH)]2+ by cyclic voltammetry. At an [Os(bpy)2(bpy-(CH2)13SH)]2+/Au electrode, the oxidation peak of DA shifted to a much more positive potential as compared with that of a bare gold electrode, while the oxidation peak potential of AA showed a slightly negative shift due to their different electrostatic interactions with the cationic monolayer. Thus, a sufficient potential difference was achieved for distinguishing the electrochemical responses of DA and AA. However, when CH3(CH2)11SH was mixed into the cationic monolayer, the enhanced packing of the mixed monolayer blocked the access of DA or AA to the electrode, resulting in further positive shifts for both oxidation-peak potentials.